---

Tungsten Disulfide (WS2) Nanopowder/Nanoparticles

Tungsten disulfide nanoparticles has very good preformance as solid lubricant material. It is used as solid lubricant, and dry film lubricant. It is used in self lubricating composite materials. It is most effective in haigh pressure, high load, high vacuum, high temperature, and …

---

A Comparison of Tungsten Disulfide and …

2014-5-8 · The temperature range of a dry film lubricant is based on two aspects – ambient and vacuum temperature. Tungsten disulfide can operate anywhere between -273oC to 650oC. As Ws2 performs better in extreme applications, it has the ability to provide a vacuum temperature range from …

---

Vacuum - Bearing Works

VACUUM ENVIRONMENT. VACUUM PROCESS EQUIPMENT; HANDLING SYSTEMS; COATING SYSTEMS; EXAMPLE A. BEARING TYPE: Deep groove RINGS: Stainless Steel (440C) BALLS: Stainless Steel RETAINER: Vespel®, PEEK, Stainless steel LUBRICATION: Solid lubricant coating, MOS2 (Moly Disulfide or WS2 (Tungsten Disulfide)

---

Tungsten Disulfide (WS2) Powder - Lower Friction

Tungsten Disulfide (WS2) can also be used in high temperature and high pressure applications. It offers temperature resistance from -450 deg F (-270º C) to 1200 deg F (650º C) in normal atmosphere and from -305 deg F (-188º C) to 2400º F (1316º C) in Vacuum. Load bearing ability of coated film is …

---

XPS studies of the surface of nanocrystalline tungsten ...

2010-8-1 · The fact of presence of these phases characterizes the features of real structure of the surface of nanocrystalline tungsten disulfide in vacuum conditions in the range 293–1273 K. The requirement of mutual correlation of contributions of W4f- and S2p-levels at spectra deconvolution for WS 2 XPS-spectra is an additional restriction and allows ...

---

Electrical Control of Hybrid Monolayer Tungsten …

2020-8-3 · Here, we demonstrate electrically tunable charged exciton–plasmon polaritons in a hybrid tungsten disulfide (WS 2) monolayer–plasmonic nanoantenna system. We show that electrical gating of monolayer WS 2 allows tuning the oscillator strengths of neutral and charged excitons not only at cryogenic but also at room temperature, both at vacuum ...

---

Tungsten Nanoparticles/nanopowder ( W, 99.7% 40 …

Vacuum contactors and vacuum load switches. The unique traits of tungsten at nanoscale sizes makes it an ideal material for the manufacture of vacuum contactors and vacuum load switches. Research into the full potential of tungsten in this role is still sparse, but early indications are positive.

---

Electrical Control of Hybrid Monolayer Tungsten …

2020-8-3 · Here, we demonstrate electrically tunable charged exciton–plasmon polaritons in a hybrid tungsten disulfide (WS 2) monolayer–plasmonic nanoantenna system. We show that electrical gating of monolayer WS 2 allows tuning the oscillator strengths of neutral and charged excitons not only at cryogenic but also at room temperature, both at vacuum ...

---

Dry Lubricants for Vacuum Service - Vacaero

2020-12-21 · Tungsten disulfide (Table 4) offers temperature resistance from 188ºC to 1316ºC in vacuum. The load bearing property of coated film is extremely high at 400,000 psi and a coefficient of friction of 0.044 at 20,000 psi and 0.024 between 200,000 to 400,000 psi.

---

Dry Lubricants for Vacuum Service - Vacaero

2020-12-21 · Tungsten disulfide (Table 4) offers temperature resistance from 188ºC to 1316ºC in vacuum. The load bearing property of coated film is extremely high at 400,000 psi and a coefficient of friction of 0.044 at 20,000 psi and 0.024 between 200,000 to 400,000 psi.

---

Pinewood derby car speed Tungsten Disulfide ( WS2 ) …

2020-12-4 · Tungsten Disulfide (WS2) can also be used in high temperature and high pressure applications. It offers temperature resistance from -450 deg F (-270º C) to 1200 deg F (650º C) in normal atmosphere and from -305 deg F (-188º C) to 2400º F (1316º C) in Vacuum. Load bearing ability of coated film is extremely high at 300,000 psi.

---

Wallwork: Nitron Lubrica - (Tungsten Disulphide)

Tungsten Disulphide. Wallwork Cambridges Nitron Lubrica has a dynamic coefficient of friction in the order of 0.03 and provides an exceptional low friction surface capable of withstanding operating temperatures from cryogenic levels up to 650°C, increasing to 1300°C in vacuum applications.. Wallwork Cambridge Nitron Lubrica uses a Tungsten di-sulphide make up with the ability to be precisely ...

---

Refractive index of WS2 (Tungsten disulfide) - Ermolaev

Conditions & Spec sheet n_absolute: true wavelength_vacuum: true film_thickness: 1L substrate: SiO2/Si Comments. Optical constants of monolayer WS 2 were measured by spectroscopic ellipsometry in the spectral range 365‑1700 nm. WS 2 samples were grown on sapphire by atmospheric pressure chemical vapor deposition and then transferred on silicon wafers covered by 295 nm SiO 2.

---

Applied Tungstenite: Tungstenite WS2: Tungsten …

2018-4-30 · Clean and Dry Tungsten Disulfide is ideal for applications that absolutely need to remain dry. WS2 was designed for the vacuum of space and extreme temperature changes (therefore no moisture is needed for lubrication). Tungsten Disulfide is also inert, non-toxic and non-corrosive which makes it perfect for when migrating substances can't be risked.

---

In-Vacuum Accessories - Ultra High Vacuum Technology

Pt100 Sensor on Support Piece with 4-Wire Cabling L=500mm, uncalibrated Gears coated with Tungsten-Disulfide Dry Lube Coated Gears Bakeout equipment NEG PUMPS & Vacuum …

---

In-Vacuum Accessories - Ultra High Vacuum Technology

Pt100 Sensor on Support Piece with 4-Wire Cabling L=500mm, uncalibrated Gears coated with Tungsten-Disulfide Dry Lube Coated Gears Bakeout equipment NEG PUMPS & Vacuum …

---

WS2 Coating for Vacuum Screw & System Fasteners | …

UC Components offers WS 2 coating for all our RediVac® vacuum screws, washers, and hex nuts.WS 2 (tungsten disulfide) coating provides vacuum compatible lubrication and improved wear resistance for treated components. Our WS 2 coatings are applied without chemical binders, and are impinged into the product’s surface to ensure dimensional integrity and minimize screw galling, flaking ...

---

Tungsten Disulfide Nanopowder/ Nanoparticles ( …

A 99.9% pure silver grey powder composed of flaky particles of tungsten disulfide, with particle sizes of approximately 0.8 um. A partially soluble material known in its naturally occurring form as tungstenite, these particles are best known for their value as solid lubricants and for catalysis.

---

WS2 Coatings Ltd. - High Performance Dry Lubricants, …

Welcome to WS2 Coatings Ltd. High Performance Dry Lubricants [n. 1. A secret formula, method or device that gives a manufacturer an advantage over competitors.] Tungsten disulphide was developed by NASA as a lubricant for the mariner deep space probes, where the high vacuum and friction coefficient temperature render conventional lubricants unsuitable for the missions, making them ideal for ...

---

WS2 Tungsten Disulfide | Sputtering Targets | Vacuum ...

2020-11-19 · Products. We manufacture and distribute sputtering targets and evaporation materials for all sputtering tools.

---

Dicronite® Tungsten Disulfide (WS2 Coating)

Originally patented for NASA in 1965, Dicronite®, a very thin dry lubricant, continues to reduce friction and increase production across industries. This modified Tungsten Disulfide (WS2 coating) performs in ultra low and extremely high temperatures, while adhering to metal, plastic, and ceramic substrates.

---

WS2 Tungsten Disulfide | Sputtering Targets | Vacuum ...

2020-11-19 · Products. We manufacture and distribute sputtering targets and evaporation materials for all sputtering tools.

---

Kurt J. Lesker Company | Tungsten Crucibles (W) | …

Common Causes of Crucible Breakage. The ramp/soak levels are wrong for that material. A recipe for e-beam consists usually of two ramp/soak power levels.

---

Reactive Magnetron Sputtering of Tungsten Disulfide …

Tungsten disulfide (WS2-x) films (0.07 <= x <= 0.7) were prepared by reactive magnetron sputtering from a tungsten target in rare gas/H2S atmospheres and at substrate temperatures up to 620 degrees C.

---

Reactive Magnetron Sputtering of Tungsten Disulfide …

Tungsten disulfide (WS2-x) films (0.07 <= x <= 0.7) were prepared by reactive magnetron sputtering from a tungsten target in rare gas/H2S atmospheres and at substrate temperatures up to 620 degrees C.

---

WS2-Tungsten disulfide_HUAWEI MATERIAL

2019-8-7 · Tungsten disulfide, a kind of black gray solid powder, may be used as additive of high-temperature lubricating grease. The lubricating grease added with WS2 powder is featured with good performance such as high dropping point, high oil film strength and low coefficient of friction, etc., and applied to solid lubrication in fields such as spaceflight (only WS2 can resist the temperature from ...