.jpg "TR-PMA01 PMA Polymethacrylate Pour Point Depressant")
TR-PMA01 PMA Polymethacrylate Pour Point Depressant
.jpg "TR-EPC02 Ethylene-Propylene Copolymer")
TR-EPC02 Ethylene-Propylene Copolymer
.jpg "WS2 Tungsten Disulfide Best Engine Oil Additive Lubricant Additive")
WS2 Tungsten Disulfide Best Engine Oil Additive Lubricant Additive
.jpg "Engine Oil Additives Friction Modifier MoDTC(liquid)")
Engine Oil Additives Friction Modifier MoDTC(liquid)
.jpg "Graphene Best Oil Additive Engine Oil additive")
Graphene Best Oil Additive Engine Oil additive
.jpg "TR-202 Zinc Butyl Octyl Primary Alkyl Dithiophosphate")
TR-202 Zinc Butyl Octyl Primary Alkyl Dithiophosphate
Description of PTFE
Poly(tetrafluoroethylene) (PTFE) has a strip structure in which crystal flakes and non-crystalline flakes are alternately arranged, and the non-crystalline portion is easy to slide, so the friction coefficient is small, and it is spaced between the friction pairs so that it has excellent anti-friction resistance. The grinding characteristics, therefore, PTFE can be used as a typical solid lubricating material, showing excellent performance in terms of heat resistance, wear resistance, self-lubricity, and low friction factor. Because PTFE is different from inorganic solid lubricants, PTFE is an organic polymer that does not form branches in the polymer. Its molecular contour is smooth, which makes it have a low coefficient of friction and can form a transfer on the dual surface during sliding. Membrane, therefore, the wear resistance of PTFE-based solid lubricant coatings is 5-7 times higher than that of MoS2 and graphite solid lubricant coatings.
CAS:9002-84-0
Parameters of PTFE
| Item | Specification |
| Appearance | white fine powder |
Moisture content |
≤ 0.03 |
| Average particle size | D50 ≤10μm, D90 ≤3μm |
| Molecular weight | 10000-30000 |
| Melting point | 327±5℃ |
| Decomposition temperature | 430℃ |
Melt viscosity |
102-106Pa•S |
Physical Data of PTFE
| Chemical formula | -(CF2-CF2)n- |
| Molecular weight | 100.015612 |
| EINECS | 204-126-9 |
| Melting point | 327℃ |
| Boiling point | 400℃ |
| Water soluble | Insoluble in any solvent |
| Density | 2200kg/m3 |
| Storage method |
Airtight at room temperature, avoid light, ventilated and dry place |
Application of PTFE
PTFE as an engine oil additive can be added to the grease to effectively improve the anti-wear and anti-friction properties of the grease, enhance the aging properties of the grease, and enhance the high-temperature performance of the grease and form a friction polymer film. Adding PTFE lubricants, greases, and lubricants can lubricate the oil film under low speed, high temperature, and high load conditions. PTFE is also widely used in other lubrication applications. PTFE is blended with a variety of other engineering plastics to provide a solid material with excellent lubricity.
Storage Conditions of PTFE
1) Store in a dry environment at room temperature.
2) Avoid damp and high temperature.
Packing & Shipping of PTFE
We have many different kinds of packing which depends on the PTFE powder quantity.
PTFE powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
PTFE powder shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.
.jpg "Teflon Grease PTFE Grease PTFE Lubricant Teflon Lubricant")
